| Sheet Packing |
Description |
Application |
| Red Rubber |
This rubber-SBR combination is available in various widths
and thickness. It is suitable for medium applications with hot or cold water,
saturated steam and air. |
- Temperature up to 250° F
- Medium pressure
- Hydraulic applications |
| Cloth-Inserted Rubber |
This material is used for higher pressures with temperatures
to 250° F. It is useful for gasketing on narrow flanges with a high bolt load. |
- Temperature up to 250° F
- Low pressure
- Cold
- Narrow flanges |
| Pure Gum Rubber |
This rubber sheet is very soft with a low durometer
hardness. It is used to seal against hot or cold water where a soft seal is
required with minimum pressure. |
- Temperature up to 150° F
- Refrigeration and marine service
- Doors
- Rough flanges |
| Silicone Rubber |
This material offers good electrical strength and insulation
as well as resistance against deterioration from sunlight. moisture, and oxidation.
It contains no acid-producing chemicals, is odorless, tasteless, non-toxic and non
corrosive |
- Temperature up to 500° F
- Flexibility and strength in insulation
|
| Buna - N Rubber |
This Nitrile-Butadiene material is a soft, high grade sheet
packing used as gasketing for aromatic fuels and solvents. It is resistant to the
effects of sunlight and its water absorption characteristics are low. |
- Temperature up to 250° F
- Aromatic fuels and solvents |
| Butyl Rubber |
This synthetic material features excellent aging properties,
non-petroleum oil resistance and low permeation. It offers good weather resistance
and excellent dielectric strength. |
- Temperature up to 300° F
- Oxidizing chemicals
- Animal and vegetable fats, oils and greases |
| EPR/EPDM |
This ethylene propylene rubber is a high performance
gasketing material used in the presence of heat, steam, ozone and chemicals. It
offers good |
- Temperature up to 250° F
- Heat, steam, & ozone
- Acids, alkalis, and hydraulic fluids |
| Vitonİ |
This unique material has excellent high temperature, air,
oil, and chemical resistance. We supply grade specific material |
- Excellent high temperature, air, oil, and chemical
resistance |
| Neopreneİ |
With a few exceptions, it is an excellent material for
sealing oil, gas. and petroleum solvents. |
- Temperature up to 250° F
- Oil, gasoline, and petroleum solvents |
| Tan Vegetable Fiber |
This is a low cost general purpose material for sealing
petroleum products and hot and cold water. it has excellent solvent resistance to
products used in automotive applications. |
-Temperature up to 250° F
- Automotive use - gasoline, benzene, oil and grease |
| Hard Vulcanized Fiber |
This material is made from converted cellulose into a dense
rough substance. It has abrasion resistant properties as well as mechanical and
dielectric strength. |
- Temperature up to 220° F
- Abrasion resistance |
| Fibercork |
This is a combination of cork and fiber, made with cork
particles, bonded with glue-glycerin impregnation. It is impervious to gasoline, oil
and water. |
- Temperature up to 250° F
- Low pressure applications |
| Ceramic |
These fibers are light weight thermal insulation products
designed for temperatures up to2300° F. They have high heat resistance, chemical
stability, light weight, thermal stability and sound absorption. |
- Temperature up to 2300° F
- High temperature insulation and sealing |
| U-Car Grafoilİ - Flexible Graphite |
These unique material contains no resin binders or organic
fillers. It resists corrosion, especially at high temperatures and offers
compressibility retention at all temperatures. |
- Temperature up to 5000° F in non-
|